| Receiver type |
Direct-sampling, digitally down-converting software-defined receiver |
| Frequency range |
9 kHz to 49,995 MHz |
| Tuning resolution |
1 Hz |
| Mode |
AM, AMS, LSB, USB, CW, FMN, FSK, UDM (user-defined mode)
DRM mode optional |
| Image Rejection |
90 dB |
| IP3 |
+31 dBm min.
|
| Attenuator |
0 - 21 dB, adjustable in 3 dB steps
|
| SFDR |
107 dB min.
|
| Noise figure |
14 dB
|
| MDS |
-130 dBm @ 10 MHz
|
| Phase noise |
-145 dBc/Hz @ 10 kHz
|
| RSSI accuracy |
2 dB |
| RSSI sensitivity |
-140 dBm |
| Bandwidth
|
10 Hz - 2 MHz
(selectable in 21 coarse steps, fine adjustment in 1 Hz steps)
|
| Spectrum analyzers
|
Input spectrum/waterfall, 30 or 50 MHz wide, 1.5 kHz resolution bandwidth
DDC spectrum/waterfall, max 2 MHz wide, 1 Hz resolution bandwidth
Channel spectrum, max 62.5 kHz wide, 1 Hz resolution bandwidth
Demodulated audio, 16 kHz wide, 1 Hz resolution bandwidth
|
| ADC |
16 bit, 100 MSPS |
Sensitivity
(@ 10 MHz) |
| AM | -98 dBm (2.8 µV) @ 10 dB S+N/N, 30% modulation |
| SSB | -116 dBm (0.35 µV) @ 10 dB S+N/N |
| CW | -123 dBm (0.16 µV) @ 10 dB S+N/N |
| FM | -106 dBm (1.1 µV) @ 12 dB SINAD, 3 kHz deviation |
|
| Tuning accuracy |
0.5 ppm @ 25° C |
| Tuning stability |
2.5 ppm (0 to 50° C) |
| MW filter |
Cut-off frequency 1.8 MHz @ -3 dB
Attenuation 60 dB min @ 0.5 MHz
|
| Antenna input |
50 ohm (SMA connector) |
| Output |
24-bit digitized I&Q signal over USB interface |
| Interface |
USB 2.0 High speed |
| Power supply |
12 V DC @ 500 mA |
| Operating temperature |
0 to 50°C |
Specifikationer kan ändras utan föregående meddelande på grund av fortlöpande produktutveckling och förbättringar.
|
